Papua New Guinea LJ350B aluminum tube production line

Category:

Product Description

Product: LJ350A aluminum tube continuous extrusion production line
I. Technical parameters
(1) Continuous squeeze host parameters:
Host model:	LJ350B
Nominal diameter of extrusion wheel:	350mm
Rated speed:	1-20rpm
Main motor power:	200kw
Single wheel and single slot
(2) Production line parameters
1. Rod blank: single rod feeding
diameter:	Ф12-15mm
Diameter tolerance:	±0.2mm
Yield strength:	95Mpa
2. Product: Range: 7-40mm diameter pipe or multiple empty pipes within 60mm width
3. Average output:	200- 400kg/h
4. Installed capacity:	380V, 3-phase, 250KVA
5. The amount of overflow:	1-3%
(3) Workshop size:
Not less than:	35M in length, 9M in width, 8M in height
Cooling water:	Cooling Tower 80m³/h
Compressed air:	0.7Mpa,2 m³/min
(4) Operators:	2 names
Three. The complete production line unit includes the following equipment:
Pole material pay-off stand	一台
Pole feeding straightening machine	一台
Aluminum pole brushing machine	Second set
Aluminum rod feeding and cutting machine	One
Aluminum continuous extrusion machine	一台
Machine and product cooling system	One set
meter counting device	一台
1000 special take-up machine	Two sets of
Electronic control (with touch screen) system	A set of
Hydraulic and lubrication system	A set of

: next page

Contact

Add.: No. 279, Huanghe West Road, Xinbei District, Changzhou City, Jiangsu Province Contact Person: Bangjun Shu

WeChat