Papua New Guinea TJ250 flat copper wire production line
Product Description
| Product: Copper and Aluminum Flat Wire Continuous Extrusion Production Line | |
| I. Technical parameters | |
| (1) Continuous extrusion host parameters: | |
| Host model: | TJ250 |
| Nominal diameter of extrusion wheel: | 250mm |
| Rated speed: | 11rpm |
| Main motor power: | 45kw |
| (2) Production line parameters | |
| 1. Copper rod blank: | |
| Diameter: | Ф8mm |
| Diameter tolerance: | ±0.2mm |
| Yield strength: | Upstream oxygen-free copper rod 160Mpa |
| 2. Flat wire products: | |
| cross-sectional area range: |
8-60mm² |
| Maximum width: |
18mm |
| Product performance index: |
Comply with GB5585.1-85 standard requirements |
| 3. Average output: | 100- 180kg/h |
| 4. Installed capacity: | 380V, 3 phase, 75KVA |
| 5. The amount of overflow: | 1-3% |
| (3) Workshop size: | |
| Not less than: | length 22M, width 7M, height 4M |
| Cooling water: | Cooling Tower 80m³/h 0.5m² |
| Compressed air: | 0.7Mpa,2 m³/min |
| (4) Operators: | 2 persons |
| Three. The complete production line unit includes the following equipment: | |
| Pole material pay-off stand | One |
| Copper rod feeding straightening machine | One |
| Copper continuous extrusion machine | One |
| Cooling and anti-oxidation system (with blow-drying) | One set |
| meter counting device | One |
| Take-up machine (800mm) | One set |
| Electronic control (with touch screen) system | a set of |
| Hydraulic and lubrication system | a set of |
Contact
Add.: No. 279, Huanghe West Road, Xinbei District, Changzhou City, Jiangsu Province Contact Person: Bangjun Shu
Tel: 13506124377
Phone: +86-519-85960371 / +86-519-85960370
Fax: +86-519-85960370